深圳市凯士比阀门有限公司

网站首页 > 产品展示 > 进口水泵 > 进口离心泵

    进口管道离心泵

    • 产品型号
    • 公称通径
    • 公称压力
    • 产品材质
    • 产品价格
    • 产品品牌德国汉克(HANK)

    本公司专业代理、销售、供应德国汉克(HANK)进口管道离心泵产品,最新最全的优质进口管道离心泵品牌厂家推荐,欢迎来电洽谈与合作,咨询热线:0755-61280628。

    1. 详细信息
    进口管道离心泵选用国际优秀水力模型,在一般立式泵的基础上进行巧妙组合设计而成,同时根据使用温度、介质等不同在管道离心泵基础上派生出适用热水、高温、腐蚀性化工泵、油泵。该系列产品具有高效节能、噪音低、性能可靠等优点。
    产品特点
    1、该泵为立式结构,进出口口径相同,且位于同一中心线上,可像阀门一样安装于管路之中,外形紧凑美观,占地面积小,建筑投入低,如加上防护罩则可置于户外使用。
    2、叶轮直接安装在电机的加长轴上,轴向尺寸短,结构紧凑,泵与电机轴承配置合理,能有效地平衡泵运转产生的径向和轴向负荷,从而保证了泵的运行平稳,振动小、噪音低。
    3、轴封采用机械密封或机械密封组合,采用进口钛合金密封环、中型耐高温机械密封和采用硬质合金材质,耐磨密封,能有效地延长机械密封的使用寿命。
    4、安装检修方便,无需拆动管道路系统,只要卸下泵联体座螺母即可抽出全部转子部件。
    5、可根据使用要求即流量和扬程的需要采用泵的串、并联运行方式。
    6、可根据管路布置的要求采用泵的竖式和横式安装。
    工作条件
    1、吸入压力≤1.0MPa,或泵系统最高工作压力≤1.6MPa,即泵吸入口压力+泵扬程≤1.6MPa,泵静压试验压力为2.5MPa,订货时请注明系统工作压力。泵系统工作压力大于1.6MPa时应在订货时另行提出,以便在制造时泵的过流部分和联接部分采用铸钢材料。
    2、环境温度<40℃,相对湿度<95%。
    3、所输送介质中固体颗粒体积含量不超过单位体积的0.1%,粒度<0.2mm。
    注:如使用介质为带有细小颗粒,请在订货时说明,以便德国汉克集团采用耐磨式机械密封。
    主要用途
    1、供输送清水及物理化学性质类似于清水的其他液体之用,适用于工业和城市给排水、高层建筑增压送水、园林喷灌、消防增压、远距离输送、暖通制冷循环、浴室等冷暖水循环增压及设备配套,使用温度T<80℃。
    2、适用于:能源、冶金、化工、纺织、造纸,以及宾馆饭店等锅炉高温热水增压循环输送及城市采暖系统循环用泵,使用温度T<120℃。
    3、供输送不含固体颗粒,具有腐蚀性,粘度类似于水的液体,适用于石油、化工、冶金电力、造纸、食品制药和合成纤维等部门,使用温度为-20℃~+120℃。
    4、供输送汽油、煤油、柴油等石油产品,被输送介质温度为-20℃~+120℃。
    Pipeline centrifugal pump selection of international excellent hydraulic model, in the general vertical pump on the basis of ingenious combination of design, at the same time according to the use of temperature, medium and other different in the pipeline centrifugal pump derived from the application of hot water, high temperature, corrosive chemical Pump, pump. The series of products with high efficiency, low noise, reliable performance and so on.
    Features
    1, the pump for the vertical structure, import and export caliber the same, and located in the same center line, like the valve can be installed in the same pipe, the appearance of compact and beautiful, small footprint, low construction, such as with a protective cover Can be placed outdoors.
    2, the impeller is directly installed in the motor on the elongated shaft, axial size is short, compact, pump and motor bearing configuration is reasonable, can effectively balance the pump running radial and axial load, thus ensuring the pump running smoothly, Vibration is small, low noise.
    3, the shaft seal with mechanical seal or mechanical seal combination, the use of imported titanium seal ring, medium-sized high-temperature mechanical seal and the use of carbide material, wear-resistant seal, can effectively extend the mechanical seal life.
    4, easy installation and maintenance, no need to dismantle the pipe system, as long as the removal of the pump seat nut can extract all the rotor parts.
    5, according to the use of requirements that flow and head of the need to use the pump string, parallel operation.
    6, according to the requirements of the pipeline layout using the vertical and horizontal installation of the pump.
    Working conditions
    1, the suction pressure ≤ 1.0MPa, or pump system maximum working pressure ≤ 1.6MPa, that is pump inlet pressure + pump head ≤ 1.6MPa, pump static pressure test pressure of 2.5MPa, please specify the system when the work pressure The Pump system working pressure greater than 1.6MPa should be made in the order, so that when the pump part of the pump and the connection part of the use of cast steel materials.
    2, ambient temperature <40 ℃, relative humidity <95%.
    3, the volume of solid particles in the transport medium does not exceed 0.1% of the volume per unit volume, particle size <0.2mm.
    Note: If the use of media with a small particle, please specify when ordering, so that the German Hank Group wear-resistant mechanical seal.
    The main purpose
    1, for the delivery of water and physical and chemical properties similar to other liquids used in water, for industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster, long-distance transport, HVAC refrigeration, Heating and water cycle pressurization and equipment, the use of temperature T <80 ℃.
    2, applicable to: energy, metallurgy, chemical, textile, paper, and hotels and other high-temperature hot water boiler cycle and the city heating system circulation pump, the use of temperature T <120 ℃.
    3, for the transport of non-solid particles, corrosive, viscosity similar to the liquid water, for petroleum, chemical, metallurgical power, paper, food and synthetic fiber and other departments, the use of temperature -20 ℃ ~ +120 ℃.

    4, for the delivery of gasoline, kerosene, diesel and other petroleum products, the transmission medium temperature is -20 ℃ ~ +120 ℃.

    进口水泵

    进口水泵

    进口水泵

    德国汉克(HANK)进口水泵成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特法伦州首府杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump没有故障的水泵)公司成立。汉克水泵是以生产高品质、先进的水泵、测量及控制系统而享誉全球的跨国性生产企业,在全球几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

    GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

    进口水泵厂家

    进口水泵厂家

    进口水泵厂家

    德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造前所未有的解决方案和理念,而成为全球领先的水泵制造商。
    The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

    标签:   管道离心泵 进口管道离心泵