深圳市凯士比阀门有限公司

网站首页 > 产品展示 > 进口水泵 > 进口离心泵

    进口立式多级离心泵

    • 产品型号
    • 公称通径
    • 公称压力
    • 产品材质
    • 产品价格
    • 产品品牌德国汉克(HANK)

    本公司专业代理、销售、供应德国汉克(HANK)进口立式多级离心泵产品,最新最全的优质进口立式多级离心泵品牌厂家推荐,欢迎来电洽谈与合作,咨询热线:0755-61280628。

    1. 详细信息
    进口立式多级离心泵是采用了高效节能的优秀水力模型,因此具有效率高,性能范围广等优点,更好地满足了用户的使用要求。另外,该泵在结构上采用了立式、分段形式,且运转安全、平稳、寿命长、占地面积小、安全维修方便。立式多级离心泵采用国际推荐使用的高效节能产品水力模型,为立式多级多节段式结构,螺杆把进水段、中段、出水段夹紧联成一体。水泵每一级装一个叶轮、一个导水叶。轴向力采用水力平衡法解决,残余轴向力由球轴轴承承受,用油脂润滑。轴封采用软填料或机械密封。德国汉克(HANK)立式多级离心泵主要供吸送稀释的、清洁的、不腐蚀的、不爆炸的清水及物理化学性质类似水的不含固体颗粒或纤维的液体。
    适用范围
    广泛应用于高层建筑的消防、生活供水以及空调机组循环、冷却水输送。
    产品特点
    1、水力模型先进:效率高,性能范围广。
    2、结构新颖,运行可靠:取消了平衡鼓,其轴向力采用水力平衡,彻底解决了平衡鼓易锈蚀、易咬死、易磨损的问题,保证了运行更加可靠。
    3、更少的运行、维修费用:采用优质机械密封,耐磨损、无泄漏、使用寿命长,故障率低,具有更少的运行维修费用。
    4、运行平稳,噪音低:采用低转速电机,使泵运行平稳,噪音更低。
    5、立式结构,占地面积小。
    技术参数
    流量:4.2-504m3/h;
    扬程:24-240m;
    功率:1.5-450kw;
    转速:1480r/min;
    口径:φ40-φ250;
    温度范围:0-+90℃;
    工作压力:≤2.4Mpa。
    使用条件
    1、使用的介质应类似水,运动粘度<150mm2/s,且无坚硬颗粒,无腐蚀性质;
    2、使用的环境海拔高度<1000米;
    3、介质使用温度-15℃~120℃;
    4、最大系统工作压力≤2.5MPa;
    5、周围环境温度应低于40,,相对湿度低于95%。
    Vertical multi-stage centrifugal pump is a high efficiency and energy saving excellent hydraulic model, so it has high efficiency, wide range of performance advantages, and better meet the user's requirements. In addition, the pump in the structure of the vertical, sub-form, and safe operation, smooth, long life, small footprint, safe and easy maintenance. Vertical multi-stage centrifugal pump using the international recommended efficient energy-saving products, hydraulic model for the vertical multi-level multi-segment structure, the screw into the water section, the middle section of the water section together. Each level of the pump is equipped with an impeller, a water guide. The axial force is solved by the hydraulic balance method, and the residual axial force is borne by the ball bearing and lubricated with grease. Shaft seal with soft packing or mechanical seal. Germany Hank imports of vertical multi-stage centrifugal pump is mainly for the absorption of diluted, clean, non-corrosive, non-explosive water and physical and chemical properties similar to the water without solid particles or fiber liquid.
    The scope of application
    Widely used in high-rise building fire, water supply and air conditioning unit cycle, cooling water delivery.
    Features
    1, advanced hydraulic model: high efficiency, wide range of performance.
    2, the structure is novel, reliable operation: the elimination of the balance drum, the axial force of the use of hydraulic balance, completely solve the balance drum easy to rust, easy to kill, easy to wear problems, to ensure a more reliable operation.
    3, less running, maintenance costs: the use of high-quality mechanical seals, wear-resistant, no leakage, long life, low failure rate, with less running and maintenance costs.
    4, smooth operation, low noise: the use of low-speed motor, the pump running smoothly, the noise is lower.
    5, vertical structure, small footprint.
    Technical Parameters
    Flow: 4.2-504m3 / h;
    Head: 24-240m;
    Power: 1.5-450kw;
    Speed: 1480r / min;
    Caliber: φ40-φ250;
    Temperature range: 0- + 90 ℃;
    Working pressure: ≤ 2.4Mpa.
    Conditions of Use
    1, the use of the media should be similar to water, kinematic viscosity<150mm2 / s, and no hard particles, no corrosive properties;
    2, the use of the environment altitude <1000 meters;
    3, the use of medium temperature -15 ℃ ~ 120 ℃;
    4, the maximum system working pressure ≤ 2.5MPa;

    5, the ambient temperature should be less than 40, relative humidity less than 95%.

    图片关键词

    图片关键词

    进口水泵

    德国汉克(HANK)进口水泵成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特法伦州首府杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump没有故障的水泵)公司成立。汉克水泵是以生产高品质、先进的水泵、测量及控制系统而享誉全球的跨国性生产企业,在全球几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

    GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

    进口水泵厂家

    进口水泵厂家

    进口水泵厂家

    德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造前所未有的解决方案和理念,而成为全球领先的水泵制造商。
    The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

    标签:   多级离心泵 立式多级离心泵 进口立式多级离心泵